Evcharge4u Inc

Install three evercharge evchargers on an existing 208volt-200amp ev-panel, raceway emt one-inch with 6awg copper wire as feeders unit 605, unit 302 and unit 902

72 Townsend StFinancial District/South Beachcomplete#Electrical#EV charger

Install evse 240v-40amp with dcc load management device. #6 awg copper

638 19th StPotrero Hillcomplete#EV charger

Install an evse on a dedicated circuit 208volt-50amp from the ev panel. emt run with 6awg copper wire. please use entrance 1701 jackson street.

1800 Washington StPacific Heightsissued#EV charger

Install an evercharge evcharger on a dedicated 208v-40a circuit. our raceway is a 150 lf emt conduit with 6 awg copper wires as feeders.

74 New Montgomery StFinancial District/South Beachissued#EV charger

125amp ev panel fed from house panel. install 8 evse 240v-50amp with load sharing.

550 South Van Ness AvMissioncomplete#EV charger

Install 110v outlet on dedicated 110v-20amp from the house panel with 150lf of surface mounted 3/4in. emt conduit & #10awg.

501 Beale StFinancial District/South Beachcomplete#Electrical

Tap off the main disconnect panel outside the garage. install small sub panel 8-16 in the garage 240volt-50amp. breaker 240volt-30amp for ev charger.

26 Watt AvExcelsiorcomplete#EV charger

Reroute the evpanel from the existing e-panel to the main switch gear electrical room basement. emt 1-1/4 inch with nr.1awg as feeders.

1 Polk StTenderloincomplete#Electrical

Install 4x evse in parking garage on prewired junction box, with evercharge chargers.

1870 Jackson StPacific Heightscomplete#EV charger

Robert quan-unit #310 replace one evcharging station with a newer evercharger and upsize the breaker to 60amp. priscilla lui-unit #606 install evercharge evcharging station, on a dedicated 208v, 60a circuit. our raceway is emt conduit, with 6 awg copper feeders and 8 awg copper equipment ground.

72 Townsend StFinancial District/South Beachcomplete#EV charger

Install a subpanel for unit #604 and reroute the unit to the panel and to an evse charging station with load management. our raceway is emt conduit. wire size for the evse is feeders 6awg copper with equipment ground 8awg copper

1900 Vallejo StMarinacomplete#Electrical#EV charger

Install 9 evchargers from an ev panel. our raceway is emt conduit, with 6awg copper wires as feeders and 8awg copper wire for equipment ground.

603 Tennessee StPotrero Hillcomplete#EV charger

Evercharge evcharger on dedicated circuit 208volt-40amp, raceway emt condui with 6awg copper wires as feeders.

2525 Van Ness AvMarinacomplete#EV charger

Online electrical permit: category 4a: installation of fire warning and controlled devices of 2,501 - 5,000 ft². install evercharge evcharging station on a dedicated circuit 208volt-40amp, from existing wiring to the parking stall 17. raceway emt conduit with 6awg copp

2525 Van Ness AvMarinafiled#EV charger

Install (4) 240v-50a two-pole circuit breakers to supply power for (10) evse on new 208v-125 sub panel. install (10) wall mounted 240v-48a zerova ax48 electric vehicle chargers, in a parking lot. our raceway is 2” emt conduit with #3/o copper feeders, #4awg neutral, and #4awg copper equipment ground.

1 Polk StTenderloincomplete#EV charger

Install evse 240v-40amp emt conduit surface-mounted feeders 6awg copper wires.

618 Girard StPortolacomplete#EV charger

Install dcc-12 with 40amp breaker behind existing panel in the garage, raceway 120ft emt 3/4-inch with feeders 6awg copper.

662 Capp StMissioncomplete#Electrical

Install two evercharge charging stations (208v-40a) on an existing evpanel (208v-200a). the raceway is a 170lf emt conduit with 6awg feeders and an 8awg equipment ground. each charger has a dedicated circuit. - robert lusher #716 parking space #3 - brandon hernandez #701 parking space #6

74 New Montgomery StFinancial District/South Beachcomplete#Electrical

Evcharger on a dedicated circuit 240v-50a, extend the pre-wired romex cable 6-3 copper with emt conduit with 6awg copper wire.

2085 09th AvWest of Twin Peakscomplete#EV charger

Evse on dedicated circuit 240v - 50amp next to panel, 6awg copper wire as feeders

1234 Palou AvBayview Hunters Pointcomplete#EV charger